BLOGGER TEMPLATES AND TWITTER BACKGROUNDS

Pages

Thursday 26 July 2012

Moreheads Launch tonight at 6pm

Well its only a few more hours to go until the launch of Moreheads from Crafters Companion at 6pm today on Create and Craft. I am sure that you have seen all the amazing samples that the Design Team have been showing, so here is my last sneak peak. I made this card using the brand new section on the cd of Shaped Cards, its amazing.

Tuesday 24 July 2012

Crafters Companion new Moreheads Launch

Morning all well its another fantastic sunny day today and hope you enjoy it whatever you are doing. Today I am going to share with you a card I made using the brand new Moreheads CD from Crafters Companion and also some Moreheads Decoupage. Not long now until Crafters Companion launch this amazing CD, stamps and decoupage on Friday at 12 o'clock on Create and Craft.

Monday 23 July 2012

Wow Crafters Companion New Launch - Moreheads !!!!!!

 
 
 
Wow I am so excited guess what Crafters Companion are launching on Create and Craft on the 27th July - well its MOREHEADS and these are to die for, I don't know how they do it but every new launch just gets better and better :0).
 
So to celebrate the new launch Crafters Companion are running an amazing competition and giving you the chance to win the new Morehead CD-ROM, plus the everyday decoupage kit and Christmas decoupage kit (total prize value over £50!) All you have to do is go to Crafters Companion website here and log in. The competition will run from the 23rd July till 10am on Friday 27th, so good luck :)
 
Why not go and check out the other Design Teams amazing creations. If you would like to see how to make the card above please pop over to Crafters Companion News Views and Inspiration blog and the instructions will be there sometime this week.
 
 
 

Friday 6 July 2012

Mulberry Wood Christmas Cracker





Morning all I hope that your weather is better than ours, the thunder and lightning was awful this morning. I have been asked about the Christmas Cracker that I made for the launch of the Mulberry Wood collection from Crafters Companion so I thought that today I would share it with you. For the crackers I used the die cut and scored Paula's Crackers from Whichcraft, click here for the link.  Because the card base was white I used Tim Holtz distress Ink Broken China, which you can buy from Crafters Companion and decorated the very edges with some glitter. For the panels I used some of the Core-dinations card and a sheet of backing paper and some of the small tags from the Mulberry Wood CD. I then tied some matching ribbon around the ends of the cracker and decorated it with some snowflakes again using the core-dinations card from Crafters Companion and for the centres I used some of the Candi from Craftworks cards

Monday 2 July 2012

Project for Peek-a-Boo/Shutter card - Mulberry Wood


Here is the Peek-a-Boo card project using the Crafters Companion Hunkydory kit from the Mulberry Wood collection as promised. I first made this card a couple of years ago, I got the idea from a magazine unfortunately I can't remember which one but thought that the Mulberry Wood images would be perfect for it. This is a beautiful kit and if you would like to purchase it, then pop over to Crafters Companion.


Things you will need :

Hunkydory Mulberry Wood kit from Crafters Companion
Ultimate Pro and boxer board
Scoring Tool
Glue
Speelbinder die standard circle
low tack tape
manual die cutting machine
2 small bows
Foam pads


1. I chose a piece of the A4 card stock with borders along each side. Using your Ultimate Pro butt your card stock up to the edge of the Ultimate pro and score along the A4 gatefold line. Turn your cardstock 180 degrees and score the same line again. Burnish using your bone folder.

2. Take some coordinating card stock and mat and layer onto the 3 inside panels of your card.


3. Cut a piece of cardstock 10 cm x 21cm, for this I chose a piece of cardstock with a character to give a bit more of a focal feature.



4. Next chose your image for the peekboo-a-Boo, I chose one of the large round images so that I could cut out my aperture using a spelldinder die. From the top of your piece of card measure down 3cm and using low tack tape stick your spell binders die in place and cut out using your die cutting machine.








5. Now cut a piece of matching cardstock to measure 24.5cm by 9.5 cm and cut in half. on one piece of your card mark the centre point and then measure 5cm down. On the back of your cardstock draw a V shape as shown. Now place both pieces of card on top of each other and cut out the V shape. Using your boxer board on the straight edge of both your pieces of card measure and score at 1.5cm across and burnish





6.Firstly to line up your image place this underneath your piece of card with the aperture cut out. Remove your piece of card  and I would then mark this with a pencil line before lifting the image off the card to put the glue on, you will not see the pencil mark as it will be covered up.  Then glue into place.




6. To line up the peek-a-boo mechanism , place your image under the cut out aperture ( do not glue this piece of card at this stage ) and slide in your 2 pieces of card with the V shape cut out at either side, with the folded flaps lined up flush to the left hand edge of your outer panels. When you have them lined up correctly place a small pencil at the top of each piece of V shape card so that when you glue these down you have a guide. Remove your piece of card with the aperture cut out and put to one side. Now for this I used a wet glue as it just you a bit of movement when lining up. I have crossed the V shapes over each other so that when it opens it looks like a camera shutter, now glue these into place just on the folded flaps and gently close you card to make sure that the mechanism works, as at this stage whilst the glue is still wet you can adjust them. When everything is ok let them dry.




7. Place glue just along the top and bottom of your piece of card that has the aperture cut out and stick over your shutter mechanism.



8. To decorate the two inside panels I used two small tags from the kit and two small matching bows.


9. For the front of your card, chose two toppers from the kit and place foam pads on part of the back as shown. Attach to the left hand side front panel.





I hope that you enjoyed making this card as much as I have.